Mannok Therm Cavity / MC PIR Insulation
Mannok Therm Cavity / MC PIR insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing, for use in partial fill cavity wall applications.
The low emissivity foil facings increases the thermal resistance of the residual cavity and reducing the overall U-value of the wall.
The good dimensional tolerances of the Mannok Therm Cavity / MC PIR insulation board enabling it to be tightly butted to form a continuous layer of insulation.
Available with profiled T & G edges aiding installation and ensuring continuity of insulation across the joint.
*Mannok Therm Cavity / MC (previously Quinn Therm QW Cavity Wall)
Specification
Therm Cavity Wall board sizes are co-ordinated with standard wall tie spacings
Tongue and groove edging for continuity of insulation across joints
Zero ozone depletion potential (zero ODP) and low global warming potential (GWP)
Achieves an A+ rating when compared to the BRE Green Guide
Performance & Properties
Board size (mm)450mm x 1200mm
Thickness (mm)25mm – 110mm
EdgeButt, tongue and groove
Thermal Conductivity (λ)0.022w/mk
FacersLow emissivity foil facers
Core water vapour resistivity≅300MNs/gm
Compressive strength>150kPa
Products
Technical
Company
Contact Details
187 Ballyconnell Road,
Derrylin, Enniskillen,
Co. Fermanagh,
BT92 9GP
Derrylin, Enniskillen,
Co. Fermanagh,
BT92 9GP
08000 322 122 (UK)
1800 322 122 (ROI)
info@mannokbuild.com
1800 322 122 (ROI)
info@mannokbuild.com
